SIKA Vietnam
đồng hồ SIKA, cảm biến Sika, can nhiệt Sika, Test áp lực Sika..
Sika Vietnam | VHS 50M MS (VHS50MMS) |
Max. working pressure 25 bar | |
Max. medium temperature: 110 ℃ | |
Ambient temperature: 80℃ | |
Protection class :IP 65 | |
Set point tolerance:+/- 15% | |
Size: DN 50 | |
Process connection: 2”BSP | |
Increasing flow:39.5…..51.0 l/min | |
Decreasing flow:39.0…50.0 l/min | |
Max. flow rate: 400 l/min | |
Material: Upper section, paddle system, pipe section: Brass | |
(VHS 50M (FLOW SWITCH)) | |
SIKA Vietnam | • SemiTemp 24 |
(SemiTemp 24 - Mod. A3) | |
SIKA | |
SIKA Vietnam | • SemiTemp 24 |
(SemiTemp 24 - Mod. A3-IS) | |
IS-version | |
SIKA | |
SIKA Vietnam | • SemiTemp 24 |
(SemiTemp 24 - Mod. B3+) | |
100 stores ; ext. sensor ; RS232 & SW | |
SIKA | |
SIKA Vietnam | SIKA Infrared Digitalthermometer |
Type: MaxiTemp 24 | |
Hand held measuring device for none contact temperature measurement | |
Integrated LC-Display, LOW-Bat.-, HOLD-function, | |
Max-data-store, backlight, laser ON/OFF, | |
Graphic display for 10 measurement results, tripod mount, clock / date | |
Indication of average and difference, LO- and HI-Alarm (buzzer) | |
Measuring range: '-30...900 °C | |
Sight: 3-point-circle-laser | |
Optical resolution: '60/1 (distance / spot size) | |
Spectral range: 8...14 μm (universal) | |
Resolution: 0.1 °C | |
Accuracy: '+/-1 % of reading or +/-2 °C | |
Emmisivity: 0.30...1.00 adjustable | |
Temperature units: °C / °F (switchable) | |
Power supply: 2 x 1.5 V batterie and 7.5 VDC power supply unit | |
Dimensions / weight: 200 x 170 x 50 mm / 480 g incl. battery | |
Complete with arm strap and service / transport case | |
Model A3 (-30...900 °C, 3-point-circle-laser, 60/1) | |
SIKA Vietnam | Optional 1.1: |
Model A3-IS | |
(-30…900°C, 3-point- circle-laser,60/1, IS-Version) | |
EEX ia IIC T4 TUV 00 ATEX 1597X | |
SIKA Vietnam | Optional 1.2: |
Model B3+ | |
(-30…900°C, 3-point- circle-laser,60/1, PRO) | |
Internal data store for 100 measuting values | |
connection for external sensor type K,J or NTC | |
Output: serial interface RS 232 and 1 mV/ deg. c. | |
SIKA Vietnam | High Pressure Calibration Set |
Type P-HP Set | |
Digital reference test gauge with high pressure hose adapter | |
for calibration of Hydraulic Power Units and Fuel-Injector rigs | |
Pressure connection via quick coupling nipple 2000 bar (male) | |
Multi-purpose-LCD 20 x 60 mm | |
Function keys 'ON', 'SET', 'ZERO', 'PEAK', 'UP', 'DOWN' | |
Protection class IP65 (front), other IP40 | |
Power supply 4 x 1.5 V batteries | |
8000 h service life continuous operation | |
LOW-BAT-display, Auto-OFF function | |
Switchable pressure units bar, PSI, kPa, MPa | |
Measuring range 0…2000 bar | |
Resolution 1 bar | |
Accuracy +/-0.1 % FS +/-1 digit | |
Housing size of reference 80 x 80 x 50 mm (d x h x w) | |
Weight (reference incl. hose adapter) app. 1500 g | |
High pressure hoses (300 mm) with quick coupling (female) | |
1x red, 2000 bar, female | |
Service case with reference, with mounted adapter and 3 high pressure hoses | |
SIKA VIETNAM | Code: Thermometer 291 212 1 2 063 2 1 |
-2.91212E+12 | |
SIKA THERMOMETER | |
Sika Industrial thermometers | |
Type: 291B Straight | |
The corrected code 291B121106321 | |
Case size: 150x36mm | |
Range 0-120 deg C | |
inmersion tube length:63mm | |
Connection: G1/2 brass | |
SIKA Vietnam | SIKA-Pressure Calibrator |
Type: PM700D | |
Manual pressure pump hydraulic type | |
Pressure medium destilled water and hydraulic oil Pressure range: 0...400 bar (with dist. water) 0...700 bar (with hydraulic oil) | |
Filter Regulator | |
SIKA_Fluke | Thermo View |
TI 25 M | |
(-20…350 °C, point-laser, 390/1, PRO) | |
Thermo imager for full screen IR and picture-in-picture images | |
point and image display | |
Thermo imager for full screen IR and picture-in-picture images | |
Integrated graphic display 3,6" VGA, 640 x 480 pixel | |
Different color palettes selectable, picture-in-picture | |
Max-data-store, backlight | |
LOW-Bat.-, HOLD-function, clock / date | |
SC card as data store for upto 3000 images | |
SD card reader incl. Software, voice annotations recorder | |
Measuring range: -20…350 °C (Modell TI 25 M) | |
measuring mode: center point and HI-LO (Modell TI 25 M) | |
Optical resolution 390/1 (distance / spot size) | |
Spectral range 7.5...14 μm (universal) | |
Resolution: 0.1 °C (Modell TI 25 M) | |
Emmisivity: 0.10...1.00 adjustable (Modell TI 25 M) | |
Temperature units °C / °F (switchable) | |
Power supply internal accus | |
AC adapter terminal | |
Dimensions / weight 270 x 130 x 150 mm / 1.2 kg incl. battery | |
Complete with arm strap, service / transport case, protection pocket | |
USB data cable, software, mains adapter, accus, SD card and reader | |
SIKA_Fluke | Works Certificate (re-calibration) |
for more details Catalogue page 8 | |
SIKA | SIKA-Pressure Calibrator |
Type: PM700D | |
Manual pressure pump hydraulic type | |
Pressure medium destilled water and hydraulic oil Pressure range: 0...400 bar (with dist. water) 0...700 bar (with hydraulic oil) | |
SIKA | SIKA Temperature - Calibrators |
Type: TP 38 165 E | |
Temperature range -35 °C up to +165 °C | |
SIKA | TP 38 165 E accessories |
Adapter sleeves for the above temperature calibrators | |
EZ15028B01MS38: bore1: 6,5 mm | |
SIKA | SIKA Temperature - Calibrators |
Type: TP 17165 M | |
Temperature range: -35 to +165°C | |
Resolution of display: 1 °C | |
Tolerance: +/- 1°C | |
block controll by digital PID – controller | |
auto. adjustment | |
display: 2 line, 4 digit-digital display, 7mm | |
heating block temperature (PV) - red | |
set point temperature (SV) - green | |
Bore in heating block: diameter 28 mm, depth 150 mm | |
Power supply: 100-240 VAC,+/-10%, 50/60 Hz | |
dimensions: app. 210 x 380 (+ 50 handle) x 300 mm | |
weight: app. 10 kg | |
incl. test certificate | |
SIKA | Adapter sleeves for each of the above temperature calibrators |
Adapter sleeves (28/150) for TP 17650 M or TP17165 M – 1 bore | |
outside diameter 28 mm, depth 150 mm | |
Inside diameter between 1,5 and 25 mm in 0,5 mm steps available | |
SIKA | Calibration reference sensors |
For SeriesType TP17/28/38 | |
Type TFEE | |
Pt 100 reference sensor suitable for TT Scan | |
Sensor specific by means of EEPROM | |
Measuring range -50 °C up to +550 °C | |
Tolerance: ±0.05 °C in the range -30.00 °C up to +199.99 °C | |
±0.3 °C in the range +200.00 °C up to +550.00 °C | |
Rust and acid-proof high-grade steel 1.4571 | |
Dimension L = 300 mm, D = 3 mm | |
Robust plastic handle (150 mm) | |
Ele. connection with PVC-cable (1 m) with 7 pin SIKA-connector | |
SIKA | SIKA Temperature Calibrator Marine |
Type: TP 17650 M | |
Temperature range: Ambiente temperature to 650°C | |
Resolution of display: 1 °C | |
Tolerance: +/- 1°C | |
block controll by digital PID - controller | |
auto. adjustment | |
display: 2 line, 4 digit-digital display, 7mm | |
heating block temperature (PV) - red | |
set point temperature (SV) - green | |
Bore in heating block: diameter 28 mm, depth 150 mm | |
Power supply: 230 V 50/60 Hz | |
dimensions: app. 150 x 330 (+ 70 handle) x 270 mm | |
weight: app. 7.5 kg | |
incl. test certificate | |
SIKA | SIKA Temperature Calibrator |
Type: P 28 1300 | |
Metalblock Calibrator | |
Temperature range +400 °C up to +1300 °C | |
Resolution of display 0.5 °C | |
Tolerance of block temperature: +/-2 °C | |
Stability of block control 0.05 °C | |
Temperature display | |
1- line, 4 1/2-digit, 14 mm | |
Block temperature (PV) | |
Set point temperature (SV) | |
Temperature of device (switchable) | |
Block control by digital PID - controler | |
Automatic fine adjustment with softstart for fan Inputs | |
RTD Pt100 / 3-wire | |
TC K, J, R, B, S | |
Temperature switch | |
Elec. interconnection option | |
4mm connection without thermoelectrical potential | |
Serial Interface RS 232 C (incl. protocol) | |
Block bore diameter 28 mm, depth 200 mm | |
Power supply 230 VAC, 50/60 Hz | |
Dimensions app. 290 x 415 + 50 x 510 mm, weight app. 30 kg, incl. Test - certificate | |
SIKA | Adapter sleeves for each of the above temperature calibrator |
Adapter sleeves (28/200HT) for TP 28 1300 – 1 bore | |
outside diameter 28 mm, depth 200 mm | |
Inside diameter between 1,5 and 25 mm in 0,5 mm steps available | |
EZ20028B01MS28: | |
bore 1: 6,5 mm | |
SIKA | Calibration reference sensors |
For SeriesType TP17/28/38 | |
Type TFEE | |
Pt 100 reference sensor suitable for TT Scan | |
Sensor specific by means of EEPROM | |
Measuring range -50 °C up to +550 °C | |
Tolerance: ±0.05 °C in the range -30.00 °C up to +199.99 °C | |
±0.3 °C in the range +200.00 °C up to +550.00 °C | |
Rust and acid-proof high-grade steel 1.4571 | |
Dimension L = 300 mm, D = 3 mm | |
Robust plastic handle (150 mm) | |
Ele. connection with PVC-cable (1 m) with 7 pin SIKA-connector | |
SIKA | Type MC 50 |
Accuracy: +/-0.017 % of rdg. +K | |
Resolution: 6 digits | |
SIKA | Type MC75 |
Accuracy +/-0.014% of rdg. +k | |
Resolution 6 digits | |
Data logging function via flash memory for 10.000 measured values | |
Graphic and tabular display of the measured values | |
Sensor-specific linearization with 10 points | |
SIKA | Type MC75 Accessories |
Accuracy +/-0.014% of rdg. +k | |
Resolution 6 digits | |
Data logging function via flash memory for 10.000 measured values | |
Graphic and tabular display of the measured values | |
Sensor-specific linearization with 10 points | |
1 piece (for one of the above mentioned range) Please specify the measured pressure ranges with your order. | |
SIKA_Fluke | SIKA Thermo View (Ti25M SIKA - Fluke) |
Ti 25 M replaced TI 25 of Fluke | |
(-20…350 °C, point-laser, 390/1, PRO) | |
SIKA_Fluke | Ancillary lens for TI 25 M doubles the measuring range up to 700 °C |
With this ancillary lense it is possible to double the measuring range of the TI 25 M | |
The indicated temperatures must be multiplicated by 2 | |
SIKA_Fluke | Main adapter for ThermoView |
car adapter for power supply for TI 10 M and TI 25 M | |
SIKA_Fluke | Works Certificate (re-calibration) _(Ti25M SIKA - Fluke) |
SIKA_Fluke | SIKA Thermo View (Ti25M SIKA - Fluke) |
Ti 25 M replaced Ti25 & Ti20 of Fluke | |
(-20…350 °C, point-laser, 390/1, PRO) | |
SIKA_Fluke | Ancillary lens for TI 25 M doubles the measuring range up to 700 °C |
With this ancillary lense it is possible to double the measuring range of the TI 25 M | |
The indicated temperatures must be multiplicated by 2 | |
SIKA_Fluke | SIKA Thermo View (Ti25M SIKA - Fluke) |
Ti 25 M replaced TI 25 of Fluke | |
(-20…350 °C, point-laser, 390/1, PRO) | |
Ti25M thermometer | |
Thermo imager for full screen IR and picture-in-picture images | |
Integrated graphic display 3,6" VGA, 640 x 480 pixel | |
Different color palettes selectable, picture-in-picture for TI 10 M / TI 25 M | |
Max-data-store, backlight | |
LOW-Bat.-, HOLD-function, clock / date | |
SC card as data store for upto 3000 images | |
SD card reader incl. Software, voice annotations recorder | |
Measuring range: -20…350 °C | |
measuring mode: center point and HI-LO | |
image display: IR and true image | |
Optical resolution: 390/1 (distance / spot size) | |
Spectral range: 7.5...14 μm | |
Resolution:0.1 | |
Accuracy: +/-2 % of reading or +/-2 °C | |
Emmisivity: 0.10...1.00 adjustable | |
Temperature units: °C / °F (switchable) | |